How to fix scratches on the Epoxy Table?

Fixing scratches on an epoxy table can depend on the severity of the scratches and the type of epoxy used. Here are a few methods you can try to fix scratches on an epoxy table:

1. Minor scratches: For minor scratches, you can try using a car wax or a furniture polish that contains a mild abrasive. Apply the wax or polish to a soft cloth and gently rub the scratch in a circular motion. The abrasive in the wax or polish can help to fill in the scratch and make it less visible.

2. Sanding: For deeper scratches, you can try sanding the surface of the epoxy. Use a fine-grit sandpaper and gently sand the scratch in the same direction as the grain of the wood. Be careful not to sand too hard, as this can remove too much epoxy and make the scratch worse.

3. Touch-up kits: Some epoxy manufacturers offer touch-up kits that are specifically designed to fix scratches on epoxy surfaces. These kits typically include a small amount of epoxy that can be used to fill in the scratch, as well as a hardener and a small tool for spreading the epoxy.

4. Re-coating: If the scratches are extensive and the table is showing signs of wear and tear, it may be time to re-coat the table with a new layer of epoxy. This will require removing the existing epoxy, sanding and preparing the surface, and then applying a new layer of epoxy.

It's important to note that fixing scratches on an epoxy table can be tricky and may require some level of skill and experience. If you're not confident in your abilities, it may be best to hire a professional to do the job. It's also important to check the manufacturer's recommendations before trying any of these methods as some epoxy products may have specific instructions.